1、Is the Horizontal Slurry Pumps a centrifugal pump? How does a centrifugal pump work？
Horizontal Slurry pumps is a kind of centrifugal pump，the impeller is installed in the pump casing and fastened to the pump shaft, which is directly driven by the motor. There is a liquid suction and suction pipe in the center of the pump casing. The liquid enters the pump through the bottom valve and suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe.
Before the Slurry pump starts, the pump casing is filled with the liquid to be conveyed; after starting, the impeller is driven by the shaft to rotate at a high speed, and the liquid between the blades must also rotate with it. Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and obtains energy, leaving the outer edge of the impeller at a high speed and entering the volute pump casing. In the volute, the liquid is decelerated due to the gradual expansion of the flow channel, and part of the kinetic energy is converted into static pressure energy, and finally flows into the discharge pipeline at a higher pressure and sent to the required place. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. Since the pressure above the liquid level of the storage tank is greater than the pressure at the inlet of the slurry pump, the liquid is continuously pressed into the impeller. It can be seen that as long as the impeller rotates continuously, the liquid will be continuously sucked in and discharged.
2、What are the characteristics of horizontal slurry pumps?
DEPUMP®Horizontal slurry pumps using mechanical seals, most parts can be interchanged, and the service life is longer;
Simple operation and convenient maintenance;
DEPUMP® horizontal slurry pumps has low operating noise and small vibration;
Strong and durable, long service life, spacious flow channel, good corrosion resistance.
3、Application of horizontal slurry pumps
DEPUMP® horizontal slurry pumps is used to transport ore slurry or other heavy medium liquid weighting agent, and the slurry concentration is up to 50%. It is an indispensable equipment for conveying ore, sediment and ash in metallurgy, mining, coal, construction and other departments. It is mainly used for conveying concentrate slurry and discharging tailing in concentrate. It can also be used for conveying medium in coal preparation plant, conveying high-temperature and easy-to-crystallize slurry in aluminum plant, and conveying slurry in cement plant, etc.
4、How does a horizontal slurry pumps work?
DEPUMP® horizontal slurry pumps is driven by the motor to transfer through the V-belt pulley, and the impeller under the solid shaft is adjusted and rotated clockwise. The slurry enters the pump chamber through the feeding port, and the slurry is output under the action of the impeller.
DEPUMP® horizontal slurry pumps produced by DEPUMP® TECHNOLOGY mainly include MAH heavy duty slurry pumps, MAHR rubber line slurry pump, MHH high lift slurry pumps, ML light duty slurry pumps, MZJ slurry pump , MG gravel pumps, etc.
Horizontal Slurry Pumps has a wide performance range, good cavitation performance and high efficiency. Multi-stage tandem technology can be used to meet long-distance transportation. There are a variety of metals available for the over-current parts, and increase the depth. The use of multiple speeds and multiple variants makes the pump run under the best industrial and mining conditions. It has a long service life and high operating efficiency, and can meet many types of harsh conveying conditions.Suitable for mining and chemical industry.
The Horizontal Slurry Pumps is connected to a tank or hopper and uses gravity to move slurry and liquid from the enclosure. Located at the bottom or below the water, the pump uses the force of gravity to continuously fill the pump and then passes the material out through the discharge valve.
Horizontal Slurry Pumps mainly includes MAH Heavy Duty Slurry Pump, MAHR Rubber Lined Slurry Pump, MHH High Head Slurry Pump, ML Light Slurry Pump, MZJ Slurry Pump, MG Gravel Pump, etc. If you want to know more, you can send us an email and we will get back to you soon.
High head sand mining horizontal slurry pump is suitable for handling abrasive and corrosive solids-bearing slurry with maximum concentrations of wt 45% (ash) and wt 60% (ore).
Industrial Wastewater Recirculation Slurry Pump is mainly used in electric power, metallurgy, coal, building materials, chemical industry and other industrial industries, mainly used to transport abrasive slurry containing solid particles.
Gold Mining Slurry pump is one kind of centrifugal pump used for convey water and solid mixture medium, It is suitable to convey those less abrasive slurries, or those liquid with corrosive material, this rubber liner pump ( or polyurethane liner) is a good choice, more cheaper price and more durable in use. Widely used for coal washing, gold leaching process, bentonite slurry, or other mud,etc.
The anti abrasive horizontal slurry pump is designed to handle the transfer of abraisive and high density slurries in mining and other heavy industry.
MAH slurry pump is a single-stage horizontal slurry pump with double-shell structure produced by adopting the world's advanced technology. Its working scope is: head 6~60m, flow 10~4600m3/h. The pump body and pump cover are lined with a metal lining made of high chromium wear-resistant alloy materials. The characteristic of this lining is that it can be used until it is worn out, which greatly extends the service life and maintenance cycle of the pump. The wear resistance is very strong, and the overall economic efficiency of the operation is particularly high. The shaft seal of the slurry pump includes packing seal, mechanical seal and impeller seal. It has good corrosion resistance, high operating efficiency and long operating life. It can be used in the separation process of various ores such as iron ore, gold ore, copper ore, aluminum ore, and coal washing plants, construction industry, power plants and other industries.
The heavy duty horizontal centrifugal slurry pumps designed to handle the transfer of abraisive and high density slurries in mining and heavy industry.